Reset line HIGH?
Measure the voltage level between pin 1 (GND) and pin 3 (/RESET) of the
user port.
![[picture of user port, 13k GIF]](pics/userport.gif)
If it is well over 4V, it is considered HIGH, else LOW.
Updated: February 12th, 1998
Created: February 12th, 1998
Status : Verified on February 12th, 1998
Site copyright © 1997 by Marc-Jano Knopp
This document is part of MJK's Commodore 64 & LCD Page
Brought back to life by Peter Schepers, Dec 10, 2005 because I really liked this site!